|
The frame
 The frame, made entirely in Italy, is a carbon fess high 3K form. The
pipeline, as well as the fork and rear, are Deda Steel, built on
specific technicians Viner. The goal was to create a comfortable frame,
but rigid and lightweight. Therefore, after careful study, has reached a
form of square tubes of generous size, but without the exaggeration of
other products. This particular form, as well as being aerodynamic,
manages to combine low weight and hight rigidity to the ability to
absorb vibration. The oblique and horizontal tube have a diameter
greater in the
 joints of the box with bottom bracket and the seat tube.
Minor, however, the increase in diameter in the area of craft steering.
In this way it has tried to have a good stiffness in the area of the
crank, for a minimum of energy dissipation during the pedal, and a
certain flexibility in the area of craft steering for better absorb the
disconnections’ asphalt. From this follows that the box of the bottom
bracket is well sized, but without exaggeration, as the steering area.
The seat tube is linear and has an internal diameter of 31.6 Mm. The
fork is a Deda Black Fin, carbon monocoque high modulus. Like the
chassis, presents an excellent bill, without smears. Presents a careful
study of aerodynamic sheaths and is characterized by weight quite
content (380 grams that stated by Deda) and the ability to mount up to
700x32 tyres. The latter should not be underestimated, enabling
companies to adopt even more tyres suitable for long rides on roads
disconnected or white. The rear is the Deda, Ice Tail model (senior
sheaths) / Box (sheaths
 low), still in high modulus carbon 6K. Its' a
very wagon yet very slight performance. It has large areas of
reinforcement in both sheaths than in low and a high step wheel quite
comfortable to be able to mount tyres wider than usual 700x23. The
structure of this wagon, very compact and aerodynamic, goes perfectly
with the fork and with the rest of the pipes. All the cart is well made
with the beautiful drop in light that connected perfectly to carbon
tubes. Large, then, the choice of measures (in addition to the already
mentioned possibility to be built on the chassis measure): there are 13
measures in the standard geometry, 4 in geometry and compact geometry
for many women. In addition, you can choose the integrated seat. Four colors available: natural carbon, heavenly, red, orange and pink. The
frame alone weighs 1,130 grams, while the fork 380 grams. Of course, in
addition to the assembled bike is also available frame kit comprising
frame, fork and headset FSA. Below the table shapes and colors.
Go to page
1
2
3
4
5
|
