Bicycles

Corratec 2011

Details

Parent Category: Bicycles

Category: Corratec

Published on Tuesday, 14 September 2010 18:00

Written by Luca Salvatelli

Many innovations by Corratec for 2011, many of which already described.

For Mtb was renewed 2Circle suspension system that allows a complete separation of the damping force from the pedal. The number of rods to which is anchored suspension allows a constant distance to the pin crank pin of the rear wheel. The pull chain, caused by the action of pedalling, does not interfere with the functions of the shock. The whole system also leads to less mechanical stress of the same suspension that lasts longer than a performance far superior to traditional systems. This suspension shall be taken to renewed X-Force Full of aluminum frame and adjustable travel of 140 mm. The weights of 12.3 kg starts from version 0.1 to version 0.3 of 13.5, with assemblages Shimano XTR, XT or mixed XT/SLX. The R-Revolution has carbon fiber frame and travel of 100 mm for a full XC bike that weighs between 9.75 kg and 10.5 kg, depending on the outfit, always Shimano XTR or XT/SLX, obviously take the new rear suspension layout 2Circle.

Always with the same geometry, 2Circle and 100 mm of travel, but aluminum frame, was renewed the range Air Tech, always full of XC bikes with weights ranging from 10.65 kg to 13.2 kg. Borders XC, all-new frame X-Bow, the new fiber carbon adopt UBBS bottom bracket that allows mounting of any standard crankset and bottom bracket. With 100 mm of travel weights starting at 8.7 kg with the group Shimano XTR and DT Swiss wheels Carbon XCR 1250.

The SuperBow is always a Front with 100 mm of travel, but with an aluminum frame, which follows the same profile of the X-Bow, and is also available in versions with 29-inch wheels (Superbow 29").

X-Vert has an aluminum frame by classic forms, always with travel of 100 mm. More refined version of the X-Vert S CA, this has the same geometry X-Vert but with the tubes with aluminum core and carbon fiber reinforcement. In the Road range, many models have been updated with the new bottom bracket UBBS and new graphics.

More importantly, however, the new Super Leggero frame by Mauro Sannino. Remains a frame made entirely wrapped by Mauro Sannino, but change the pipes. Now been done differently with a layer of Kevlar internal and surface carbon 3k. New series of separate steering and fork. The weight due to different rolling dropped to just over 800 grams in size M. Strictly made to measure, remains one of the best handmade carbon frames.

Another important innovation is the E-Bow, an electric bike from Mtb that uses the beautiful carbon frame of the X-Bow, suitably adapted to perform at a high level, with considerable autonomy and can reach high speeds.